OpenVMS VMS73_MONTOR-V0100 MONITOR Alpha V7.3 ECO Summary
TITLE: OpenVMS VMS73_MONTOR-V0100 MONITOR Alpha V7.3 ECO Summary
New Kit Date: 12-JUN-2002
Modification Date: Not Applicable
Modification Type: NEW KIT
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
For OpenVMS savesets, the name of the compressed saveset
file will be kit_name.a-dcx_vaxexe for OpenVMS VAX or
kit_name.a-dcx_axpexe for OpenVMS Alpha. Once the OpenVMS
saveset is copied to your system, expand the compressed
saveset by typing RUN kitname.dcx_vaxexe or kitname.dcx_alpexe.
For PCSI files, once the PCSI file is copied to your system,
rename the PCSI file to kitname.pcsi-dcx_axpexe or
kitname.pcsi-dcx_vaxexe, then it can be expanded by typing
RUN kitname.pcsi-dcx_axpexe or kitname.pcsi-dcx_vaxexe. The
resultant file will be the PCSI installation file which can be
used to install the ECO.
Copyright (c) Compaq Computer Corporation 2002. All rights reserved.
OP/SYS: OpenVMS Alpha V7.3
SOURCE: Compaq Computer Corporation
ECO Kit Name: VMS73_MONTOR-V0100
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 272 Blocks
Kit Applies To: OpenVMS Alpha V7.3
System/Cluster Reboot Necessary: No
Rolling Re-boot Supported: Information Not Available
Installation Rating: INSTALL_3
3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
The following remedial kit(s), or later, must be installed BEFORE
installation of this, or any required kit:
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
ECO KIT SUMMARY:
An ECO kit exists for MONITOR on OpenVMS Alpha V7.3. This
kit addresses the following problems:
PROBLEMS ADDRESSED IN VMS73_MONTOR-V0100 KIT:
o The command MONITOR RMS/FILE=LOGIN.COM will access violate.
$ monitor rms/file=login.com
%MONITOR-E-COLLERR, error during data collection
-SYSTEM-F-ACCVIO, access violation, reason mask=5B,
virtual address=000000000000001B, PC=000000007ACAF7EC,
Images Affected: [SYSLIB]MONTORSHR.EXE
No reboot is necessary after successful installation of the kit.
Install this kit with the POLYCENTER Software installation utility
by logging into the SYSTEM account, and typing the following at the
PRODUCT INSTALL VMS73_MONTOR /SOURCE=[location of Kit]
The kit location may be a tape drive, CD, or a disk directory that
contains the kit.
Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt
SPECIAL INSTALLATION INSTRUCTIONS:
o Scripting of Answers to Installation Questions
During installation, this kit will ask and require user
response to several questions. If you wish to automate the
installation of this kit and avoid having to provide responses
to these questions, you must create a DCL command procedure
that includes the following definitions and commands:
- $ DEFINE/SYS NO_ASK$BACKUP TRUE
- Add the following qualifiers to the PRODUCT INSTALL
command and add that command to the DCL procedure.
- De-assign the logicals assigned
For example, a sample command file to install the
VMS73_MONTOR-V0100 kit would be:
$ DEFINE/SYS NO_ASK$BACKUP TRUE
$ PROD INSTALL VMS73_MONTOR/PROD=DEC/BASE=AXPVMS/VER=V1.0
$ DEASSIGN/SYS NO_ASK$BACKUP
All trademarks are the property of their respective owners.
Files on this server are as follows: